Modeling is Real with Fade Away

DSCF4893

We are going to cover a much talked about subject, fading.  This is the effect of the sun on real prototype paint which causes the color to change to a lighter shade or in some cases “pink out”.

Soot and dirt will make some colors go much darker, in the case of the Burlington’s 1958 chinese red boxcars that look almost boxcar brown when viewed in the late 70’s. This I know because it’s the railroad I model and I have a color chip painted with the exact formula of Dupont ®paint. The cars I saw were in a scrap line at Chicago’s Metron Steel almost 30 years ago with my friend Dave Sarther and his son Davie.  I couldn’t believe the overall change in its hue when we hiked up to their boxcar purgatory. I picked a sharp rock and scraped a patch on the side of the car and amazingly the familiar orangey-red color appeared.  This type of fade would be simulated with a wipe of PanPastel®  740.3 Burnt Sienna Shade.

DSCF4832

The Cast and Crew of this post…

Equipment painted in the transition era had a mostly lead composition and took quite a while to fade. Locomotives and freight cars painted starting in the late 60’s were required to use a paint or coating using less or no lead. This gave us a different chemical change due to the elements. The colors were also much brighter and varied. Remember the 70’s? My Mom’s house had a fridge that was two-tone brown and around the corner, red and gold foil wall paper in the hall. Those brighter colors like Rock Island Material Service Red, Light (aka. Bankruptcy) Blue, Railbox Yellow, Conrail Blue and BN Green gave us a much wider palette to work with and they faded into some interesting pastel shades. Hey we’re working with PanPastel so this should be easy.

Recently in the model world much of the available rolling stock is now pre-painted and built up.  The manufacturers give us nice paint jobs most of the time but for purists there is room for correction. So for example, I have a group of Burlington open hoppers that are painted Boxcar Red. The actual cars were painted in Mineral Red which had a redder or more orangey tone. I was happy, at the time, to weather them with my airbrush and hope I didn’t notice. Years later with PanPastel in my life, I found  380.3 Red Iron Oxide Shade that looked much closer to the color I wanted. Unlike an airbrush, PanPastel with a small Sofft Tool can get right up to the white lettering without obscuring or covering it.

Q_Ballast_Hopper

A Prototype. A style of composite railcar is this CB&Q Ballast Hopper in Chicago Ridge about 1974. Photo ©Rob Manley

DSCF4836

A Model. This is our first subject, a Proto 2000 War Emergency Hopper.

DSCF4845

Here is the cleaned up car with the PanPastel and Sofft Mini Applicator.

The car was scrubbed down with a Mr. Clean® pad to remove the previous airbrush weathering.  Then the model was washed with Dawn and water. A Flat finish of Model Master® was reapplied to the car. Note: this applies to all models in this post.

DSCF4846

Here I am applying the 380.3 Red Iron Oxide Shade. You can start to see the difference between the steel cross frame members and the top and bottom sill. I should point out this car represents a War

Emergency HT-8, 55 Ton hopper. The horizontal lines represent wooden boards that were used instead of much needed steel for the WW 2 war effort.

DSCF4848

I am using the edge of the Soft Knife with Cover (FLAT) to draw in the outside braces.

DSCF4849

Don’t worry about going over the edge. We’ll clean it up to the edge of the braces later.

DSCF4850DSCF4851

Above – I applied the overall color with the Sofft Knife with Cover and now I am using the stiff bristle artist oil painter brush on harder to reach details and panels. Lightly, as in no pressure, drag the brush over the pan surface to acquire the color. Don’t scrape the pigment out of the pan, it was designed to stay in its house.

DSCF4852

Don’t forget to do the slope sheets hidden in back of the ladder uprights.

DSCF4853

See how close with a large brush I was able to get to the lettering.  I also use the Papermate® White Magic Eraser * to clean up the lettering and car number. ( *Available at most office or art supply stores).

DSCF4854

I can remove the excess pastel over the white lettering with my Papermate® White eraser. I can even clean up some of the 380.3 Red Iron Oxide Shade from the boards. WHY? Because I will weather the boards to a silvery gray to resemble a sun bleached wood color or a darker brown to represent wood with deeper grains.

DSCF4855

Colors used were 820.5 Neutral Gray and 740.3 Burnt Sienna Shade.

DSCF4856

The Burlington painted its trucks the same shade of Mineral Red as the freight car body. The model trucks were originally painted a dark brown or weathered black (really dark gray). I have re-accentuated the truck color with  380.3 Red Iron Oxide Shade. The sides of the hopper discharge bays were highlighted with 380.3 Red Iron Oxide Shade. You can use the 013 Pearl Medium-Black Fine on the bays to represent coal dust  and the journal bearing covers on the trucks to simulate leaking grease. The bearing on the left hasn’t been treated here. Now this hopper took me about 4 or 5 minutes to do as I was photographing the various steps for the blog. With all the colors and brushes at hand you can cut the time in half. Not bad if you have to do a fleet of hoppers. Remember not all your hoppers will be composite wood and steel. We’ll talk about steel hoppers and interiors at a later blog.

DSCF4890

The cast resin coal load was painted with a Flat Black acrylic paint and when dry covered with 014 Pearl Medium –Black Coarse. This will give you a realistic and impressive SPARKLE. In a moving train it is just so cool to see.

DSCF4891

Now you can see the sparkle  on the coal.

I can overspray the new color with a Flat Finish or not (see my post on this blog about flat finishing). It depends on how often you handle the cars. You should ALWAYS start with a dead flat finish. The sparkles will matriculate to the car sides if untreated so an overspray will keep it neater.

ri199abp

Prototype photo from fallenflags.com  website.

Let’s look at this Rock Island GE  U-Boat. We can do some interesting Art with these.

DSCF4863     DSCF4868

The Yellow nose can be faded with a 250.8 Diarylide YellowTint . The sun-bleached Rock Island nose decal cam be replicated by carefully cleaning the herald on the nose from excess yellow or fading it by adding 100.5 Titanium White . It all depends on what photo you are using for your inspiration.

DSCF4865

The side doors were frequently taken off the car bodies at the diesel repair shops at Silvis, Illinois for engine repairs. The shop personnel would pile the same size doors on a skid. Rarely would they end up on the same unit. Photos show mismatch on the lettering and door colors. An occasional Maroon door would be placed on a Red car body and a bright Red door placed on a faded body. We can do this by masking off the desired door with painters Green tape or Post-It® Notes. Pick the appropriate color or carefully paint with PanPastel.

DSCF4861

After cleaning with the Mr. Clean pad the red was retouched with the airbrush to restore removed color.

DSCF4858

Clean up the white lettering with 500.5 Titanium White from my red paint overspray.

DSCF4860

I applied 780.1 Raw Umber Extra Dark to the rectangular car body vents on the side. Burnt Sienna Extra Dark is rubbed on to the radiator grills on top.

DSCF4862

Shading and Fading the long car body side panels with a small amount of 340.3 Permanent Red Shade above the letters RO, 740.3 Burnt Sienna Shade is applied to the exhaust stack, the cab roof and above the letters CK. Using the small brush with  820.5 Neutral Gray above the letters  IS.

DSCF4868

Under my thumb (song reference not intended) some of the 820.5 Neutral Gray and 740.5 Burnt Sienna on the battery box vents and snow plow.

DSCF4871

Blending the 820.5 Neutral Grey and 340.3 Permanent Red Shade on the cab and car body long hood.

DSCF4879

I have scrubbed 780.1 Raw Umber  Extra Dark on the walkways using the Sofft Knife with Cover (FLAT). You can also see how I worked some more brown shades into the top of the car body. By this point I was working faster than I could take notes and was mixing colors on the Sofft Tools.  Hey I was having fun. It was cool to see this old model built by my friend Dave Allenson get a second life.

DSCF4884

The truck side frame was painted a flat black, not much character showing.

A_LITTLE_PAYNESGREY

A Little 840.3 Paynes Gray goes a long way. We’ll add some 740.3 Burnt Sienna Shade next.

DSCF4889

Trucks having RUST and DUST weathering added.  Wow! So  Much better and see how it brings the details to life. You almost didn’t notice that the brake cylinders were cast in place. When the trucks were new and in the box they were a shiny un-painted Black plastic. Eeech!

DSCF4885

That fuel tank is really uninspiring, we’ll take a whole 45 seconds to fix that.

DSCF4888

That’s what I’m talkin’ about. The front and back of the tank were covered in 740.3 Burnt Sienna Shade to show the dirt and grime blown up from the trucks and track conditions. The sides will show some spillage as well. On some versions of this engine the tanks were painted Union Pacific Armor Grey. So always do a little research. If it is your favorite railroad then get some of the outstanding color books or DVDs available. Please support the website photo libraries that are available.

So I’ll see you at the Naperville RPM show or Milwaukee’s Trainfest this year (at the PanPastel table). Bring some flat finished cars to try the PanPastel Colors on.

Your best modeling friend in the whole world…

Rob Manley